Cheap Concreters in Cairns

Known as one of Australia's major tourist destinations, Cairns is always striving to look its best, which involves a range of concrete installation and resurfacing projects. Many factors may influence the cost of hiring a professional concreting expert, notably the size and difficulty of the project.

In Queensland, the average reported cost of a concreting service is $40 per square metre. However, this rate may vary depending on the type of concreting job. Spray-on concrete jobs usually average $45 to $75 per square metre, while exposed aggregate projects can cost up to $150 per square metre.

Other than that, the cost may also depend on the type of concrete used, the thickness of the concrete required, and the length of time the project is expected to take.

By checking out our concreting cost guide, you can learn about the factors that influence the cost of concreting services in Cairns.

To complete the wide range of concreting jobs, local trade professionals have access to many kinds of tools and machinery. What equipment will be used will depend on the scope and complexity of the project.

The only tool a concreter may need is a trowel for small jobs such as concrete repairs. However, for bigger projects such as driveway installations, concreters will need to use power floats, concrete mixers, and other larger pieces of equipment.

Due to the often unpredictable weather conditions in Cairns, it's important that professional concreters have access to a wide selection of tools and machinery to use for varying situations. For example, when laying concrete during the wet season, a concreter may need to use a pump to help lay the concrete evenly.
 

Freshly poured concrete usually takes 24 hours to 3 days to set completely. However, this period can vary depending on the type of concrete used, the weather conditions, and how thick the concrete is. Warm weather usually means concrete can set faster, while wet and cold weather results in a prolonged setting time.

Most professionals can use a chemical accelerator to speed up the setting time if you need to use the concrete surface sooner. However, it's important to note that using an accelerator may make the concrete more susceptible to cracks, so this needs to be accounted for when discussing it with your concreting expert.