Job Description: I have a damaged window frame that needs a side repaired and a door frame

Job Description: Need someone to remove garage timber frame. I'm having the garage waterproofed. Not too sure how how much of the frame needs to be removed, just what's required for waterproofing and not sure how to proceed after waterproofing is done, so please let me know what you quote and detail the works. The garage obviously need to be replastered after all the structural repair so include all of that too please and see (below) comments from our insurance building company about the cavity, if that's an issue that also needs to be fixed? Background info of the issue: Brick veneer house. Leak only occurs during heavy rain and appears through the garage skirting. The image of the skirting cut out is old (just wanted to show a clear picture of the garage) its been replastered since but leaking hasn't been fixed. From builder's report with access to the cavity from the end it was noted that there is no masonry closing off the cavity, two pieces of FC cladding appear to be closing the cavity at the bottom and no waterproofing was sighted". Builder's opinion: a combination of water from seepage due to hydrostatic pressure coming through the bottom of the slab (could see no outlet for any aggregate drain behind the slab) and a lack of waterproofing at the end of the cavity (cavity is left open) it would be highly likely that ground water is entering the cavity at this point. There's no side access to the property (garage), there's a few cm seperating between the property and neigbour's property. This is what will be done by the waterproofing specialist: "SUPPLY AND INSTALL 2 PART EPOXY TO INSIDE OF BRICK WALL. - TIMBER FRAME TO BE REMOVED BY CLIENT APPROX 12 LINEAL M ALL MATERIALS & LABOR. FORM 43 COMPLIANCE CERTIFICATE SUPPLIED". If you want to visit the property to quote or require more info please let me know. Thank you!

Job Description: Fitting a replacement internal door with an existing internal lockset taken off a disused door (will need to cut handle holes). Once fitted, the door will be removed for further painting.